3PL Scan Function Item - Function Reference Guide

This document provides a comprehensive reference for all functions available in the 3PL Scan Function Item codeunit. Use this guide to find the appropriate function for your needs and understand its parameters.

Table of Contents

Item Information Functions

5-check-if-item-exist

Validates if a customer item exists in the system.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
MESSAGE Text Input Error message to display if item doesn't exist

7-get-custom-item-info

Retrieves comprehensive information about a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
DESCRIP1 Text Output Description
DESCRIP2 Text Output Description 2
BASEUNIT Code[10] Output Base Unit of Measure
EXTERNAL Code[50] Output External No.
CARRIERTYPERECEIPT Code[20] Output Carrier Type Code (Receipt)
CARRIERTYPESHIP Code[20] Output Carrier Type Code (Shipment)
CONDITRECEIPT Code[20] Output Condition at Receipt
CONDITSHIP Code[20] Output Condition at Shipment
UOMRECEIPT Code[10] Output Unit of Measure at Receipt
UOMSHIP Code[10] Output Unit of Measure at Shipment
SPECMETH Code[20] Output Specification Method
SEARCHDESC Text Output Search Description
ITEMCATEGORY Code[20] Output Item Category Code
CUSTNO Code[20] Output Customer No.
UOMORDERING Code[10] Output Unit of Measure at Ordering
UOMCALC Code[10] Output Calculation Unit of Measure
ATTRIBUTE01-10 Text Output Attribute values 1-10
DANGEROUSGOODSCODE Code[20] Output Dangerous Goods Code
DANGEROUSGOODSCODE1 Code[20] Output Dangerous Goods Code2
DANGEROUSGOODSCATEGORY1-3 Code[20] Output Dangerous Goods Categories

60-check-customer-cust-item

Verifies if a customer item belongs to the specified customer.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
EXTITEMNO Code[20] Input External Item No.
CUSTNO Code[20] Input Customer No.

80-get-dangerous-goods-info

Retrieves dangerous goods information for a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
UNNO Code[20] Output UN Number
DGCODE Code[20] Output Dangerous Goods Code
DGDESCR Text Output Dangerous Goods Description
DGCODE2 Code[20] Output Dangerous Goods Code 2
HINO Code[20] Output Hazardous Identification No.

Location Management

3-get-default-location

Retrieves the default location for a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
BUILDINGCODE Code[20] Input Building Code
LOCATIONNO Code[20] Output Location No.
INVENTORY Decimal Output Inventory
INVENTORY BASE Decimal Output Base Inventory
DEFAULT Boolean (Text) Output Is Default
DYNAMIC Boolean (Text) Output Is Dynamic
MIN INVENTORY Decimal Output Minimum Inventory
MAX INVENTORY Decimal Output Maximum Inventory
REPLENISH Decimal Output Replenishment Quantity
MIN CARRIER QTY Decimal Output Minimum Carrier Quantity
CUSTOMSCODE Code[20] Input Customs Code
ZONECODEFILTER Text Input Zone Code Filter

4-get-default-zone

Gets the default zone for a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure
ZONENO Code[20] Output Zone No.

8-get-free-location

Finds a free location based on specified filters.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
LOCNOFILTER Text Input Location No. filter
LOCATIONTYPEFILTER Text Input Location Type filter
ZONECODEFILTER Text Input Zone Code filter
STATUSFILTER Text Input Status filter
ALT.ZONE FILTER Text Input Alternative zone filter
NOSUBS Text Input Skip parent locations (any value)
ERRORMSG Text Input Error if no location found
LOCATION Code[20] Output Located free location
BUILDINGNO Code[20] Input Building No.
WHSEACTCODE Text Input Warehouse Activity Code filter
WHSEACTGROUP Text Input Warehouse Activity Group filter
WHSEACTTYPE Text Input Warehouse Activity Type filter

9-get-last-used-loc-for-item

Retrieves the last used location for a specific item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
BATCHNO Code[20] Input Batch No.
LOC Code[20] Output Located last location
BUILDING Code[20] Input Building Code
UOM Code[10] Input Unit of Measure
ZONEFILTER Text Input Zone filter
LOCFILTER Text Input Location filter
EXCLDEFLOCS Text Input Exclude default locations (any value)
CARRIERFILTER Text Input Carrier filter
DOCUMENTFILTER Text Input Document filter
ZONETYPEFILTER Text Input Zone Type filter (0,1=Pick,2=Bulk)
CARRIERNO Code[20] Input Get customer item from carrier
EXCLLOCTYPE Text Input Exclude location type
DOCTYPEFILTER Text Input Document Type filter

10-check-if-item-exist-on-loc

Verifies if an item exists on a specific location.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
LOC Code[20] Input Location No.
MESSAGE Text Input Error message if item not found

51-get-def-loc-based-on-put-strategy

Gets a default location using warehouse put-away strategy.

Parameters
Parameter Type Direction Description
DOCNO Code[20] Input Document No.
DOCLINENO Integer Input Document Line No.
LOCNO Code[20] Output Located strategy location

EAN/Barcode Functions

1-get-cust-item-ean-code

Retrieves customer item information from an EAN code.

Parameters
Parameter Type Direction Description
EANCODE Code[20] Input EAN Code
CUSTITEMNO Code[20] Output Customer Item No.
UOMCODE Code[10] Input/Output Unit of Measure Code
CUSTNO Code[20] Input Customer No.
CHECKINEXTITEM Text Input Use EAN as filter on External Item No.
PRODUCTVARIANT Code[20] Input Product Variant filter
SKIPPRODVARFILTER Text Input Skip Product Variant filter if empty
Note

When CHECKINEXTITEM is used, a scanned value longer than 20 characters is matched on the External No. only (the External No. holds up to 50 characters); the EAN lookup is skipped for such values.

14-scan-barcode-item-uom

Processes barcode scan for a customer item.

Parameters
Parameter Type Direction Description
BARCODE Text Input Barcode input
LABELCODE Code[20] Input Label Code
CUSTITEMNO Code[20] Input Customer Item No.
ITEMUOM Code[10] Input Unit of Measure (optional)
LENGTH FACTOR Decimal Input Length/width/height division factor
WEIGHT FACTOR Decimal Input Weight division factor

18-update-ean-code-if-ean-id-01-or-02

Updates EAN code when ID is 01 or 02.

Parameters
Parameter Type Direction Description
EANIN Code[20] Input Input EAN code
EANOUT Code[20] Output Output EAN code
TAKEFIRST15C Text Input Take first 15 characters (any value)

22-get-item-ean

Retrieves the EAN code for a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
EAN Code[20] Output EAN Code

27-check-ean-code

Validates if an EAN code is valid.

Parameters
Parameter Type Direction Description
EAN CODE Code[20] Input EAN Code to validate
ERROR MSG Text Input Error message if invalid
RESULT Boolean (Text) Output Result (TRUE/FALSE)

73-create-new-ean-code-record-in-uom-details

Creates a new EAN code record for a unit of measure.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
EANCODE Code[20] Input EAN Code

83-check-ean-is-from-item-no

Verifies if an EAN code belongs to an item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
EANCODE Code[20] Input EAN Code
ERROR Text Input Error message if not found

90-check-if-ean-belongs-to-item

Validates if an EAN code belongs to a specific item.

Parameters
Parameter Type Direction Description
EANCODE Code[20] Input EAN Code
CUSTITEMNO Code[20] Input Customer Item No.
UOMCODE Code[10] Input Unit of Measure Code
CUSTNO Code[20] Input Customer No.
ERRORMSG Text Input Error message if not found

97-check-duplicate-ean-within-customer

Checks for duplicate EAN codes within a customer.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
EAN Code[20] Input EAN Code
CUSTNO Code[20] Input Customer No.

Inventory Functions

11-qty-on-location-uom-empty-baseqty

Retrieves the quantity of an item at a specific location.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
LOCATION Code[20] Input Location No.
BATCH Code[20] Input Batch No.
UOM Code[10] Input Unit of Measure Code
QUANTITY Decimal Output Quantity on location
CARRIER Code[20] Input Carrier No. filter

12-qty-per-item-based-on-filters

Gets item quantities using various filter criteria.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
ZONEFILTER Text Input Zone filter
ZONETYPEFILTER Text Input Zone Type filter
LOCFILTER Text Input Location filter
BATCHFILTER Text Input Batch filter
UOMFILTER Text Input Unit of Measure filter
CARRIERFILTER Text Input Carrier filter
CARRIERTYPEFILTER Text Input Carrier Type filter
QUANTITY Decimal Output Found quantity
QTYBASE Decimal Output Base quantity
CARRIERS Decimal Output Number of carriers

40-get-first-location-with-inventory

Locates the first location with inventory for a document line.

Parameters
Parameter Type Direction Description
DOCNO Code[20] Input Document No.
DOCLINENO Integer Input Document Line No.
LOCNO Code[20] Output Located first inventory location
HIDEDOCCARRIERS Text Input Hide document carriers (any value)

70-post-item-quantity-weight-mutations

Posts item quantity/weight mutations.

Parameters
Parameter Type Direction Description
JRNLTEMPLATE Code[20] Input Journal Template No.
JRNLBATCH Code[20] Input Journal Batch No.
DOCUMENTNO Code[20] Input Document No.
POSTINGDATE Date Input Posting Date
ENTRYTYPE Integer Input Entry Type (1=Positive, 2=Negative)
CUSTITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
QUANTITY Decimal Input Quantity
GROSSWEIGHT Decimal Input Gross Weight
NETTWEIGHT Decimal Input Net Weight
CARRIERNO Code[20] Output Carrier No.
CARRIERTYPE Code[20] Input Carrier Type
BATCHNO Code[20] Output Batch No.
EXPDATE Date Input Expiration Date
PRODDATE Date Input Production Date
FREEZINGDATE Date Input Freezing Date
LOCATION Code[20] Input Location No.
REASONCODE Code[20] Input Reason Code
AUTOPOST Text Input Auto post (any value)
AUTOREVERSE Text Input Auto reverse (any value)
CONTAINERNO Code[30] Input Container No.
VESSELNO Code[30] Input Vessel No.
STORAGECHARENO Code[30] Input Storage Charge No.
CUSTOMSCODE Code[20] Input Customs Code

Batch Management

13-check-last-expiration-date

Verifies the last expiration date for an item.

Parameters
Parameter Type Direction Description
ADDRESSNO Code[20] Input Address No.
CUSTITEMNO Code[20] Input Customer Item No.
BATCHNO Code[20] Input Batch No.
DOCTYPE Integer Input Document Type
EXPIRATIONDATE Date Input Expiration Date
RESULTSHIPPED Integer Output 1 if LastExpirationDate > ExpirationDate Shipped
RESULTSTOCK Integer Output 1 if LastExpirationDate > ExpirationDate Stock

17-check-remaining-shelf-life

Validates the remaining shelf life of an item.

Parameters
Parameter Type Direction Description
SHIPTO Code[20] Input Ship-To Address No.
CUSTITEMNO Code[20] Input Customer Item No.
CUSTNO Code[20] Input Customer No.
CALCDATE Date Input Calculation Date
EXPDATE Date Input Expiration Date
RESULT Integer Output 1 if WarningDate > ExpirationDate
MANSHELFDATE DateFormula Input Manual Shelf Life Date Formula

30-get-calculated-exp-date

Calculates an expiration date from posting date.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
POSTINGDATE Date Input Posting Date
EXPDATE Date Output Calculated Expiration Date

50-create-new-batch

Creates a new batch record.

Parameters
Parameter Type Direction Description
BATCHNO Code[20] Output Batch No.
EXTBATCHNO Code[20] Input External Batch No.
EXPIRYDATE Date Input Expiration Date
PRODUCTIONDATE Date Input Production Date
FREEZINGDATE Date Input Freezing Date
CONTAINERNO Code[30] Input Container No.
VESSELNO Code[30] Input Vessel No.

Unit of Measure Functions

20-get-uom-string

Retrieves a formatted UOM string.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
QTY Decimal Input Quantity
TOUOM Code[10] Input Target Unit of Measure
OUTPUT Text Output Formatted UOM string
AUTOCALC Text Input Auto calculate (any value)

21-get-uom-info

Gets detailed UOM information.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
QTY Decimal Output Quantity per Unit of Measure
GROSS Decimal Output Gross Weight
NETT Decimal Output Net Weight
TARE Decimal Output Tare Weight
HEIGHT Decimal Output Height
WIDTH Decimal Output Width
LENGTH Decimal Output Length
CUBAGE Decimal Output Cubage
CUBAGE_UF Decimal Output Cubage Use Factor
EANCODE Code[20] Output EAN Code
LITER Decimal Output Liter
CARRIERTYPE Code[20] Input Carrier Type
QTYPERPAL Decimal Output Quantity per Carrier
QTYPERLAYER Decimal Output Quantity per Layer
ERRORCARRTYPEUOM Text Input Error if Carrier Type UOM not found

23-get-zippcube-info

Reads and processes Zippcube measurements.

Parameters
Parameter Type Direction Description
INPUT Text Input Input string from Zippcube
ITEMNO Code[20] Input Customer Item No. to update
UOMCODE Code[10] Input Unit of Measure Code to update
SIZE FACTOR Decimal Input Size division factor
WEIGHT FACTOR Decimal Input Weight division factor
LENGTH Decimal Output Length
WIDTH Decimal Output Width
HEIGHT Decimal Output Height
WEIGHT Decimal Output Gross Weight
NETTWEIGHT Decimal Input Net Weight to set

24-get-text-per-layer

Splits a quantity into full layers and a loose remainder and returns it as text, for example 1 x 10 + 2. The layer quantity comes from the Carrier Type Unit of Measure of the customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Mandatory: Customer Item No.
QTY Decimal Input Mandatory: Quantity to split into layers
UOM Code[10] Input Optional: If empty then Unit of Measure at Shipment
HUTYPE Code[20] Input Optional: If empty then Carrier Type Code (Shipment)
ERRORIFNOTFOUND Text Input Optional: Not empty = error if Carrier Type UOM not found, else empty result
RESULT Text Output Return: <layers> x <qty per layer> + <loose qty>, e.g. 1 x 10 + 2

63-calc-quantity-per-uom-from-package-inputqty

Calculates quantity per UOM from package input quantity.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
EMBCODE Code[20] Input Package Code
INPUTQTY Decimal Input Input Quantity
OUTPUTQTY Decimal Output Calculated Output Quantity

64-calc-quantity-per-uom-from-uom2

Calculates quantity conversion between UOMs.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
FROMUOM Code[10] Input From Unit of Measure
TOUOM Code[10] Input To Unit of Measure
INPUTQTY Decimal Input Input Quantity
OUTPUTQTY Decimal Output Calculated Output Quantity
INPUTZEROISZERO Text Input If InputQty=0 then Output=0 (any value)
PRECISION Decimal Input Rounding Precision
DIRECTION Code[10] Input Rounding Direction

75-calculate-the-cubage

Calculates the volume (cubage) of an item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
QTY Decimal Input Quantity
RESULT Decimal Output Calculated cubage

81-set-uom-dimensions

Sets dimensions for a unit of measure.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
LENGTH Decimal Input Length
WIDTH Decimal Input Width
HEIGHT Decimal Input Height
QTYPERPAL Decimal Input Quantity per Pallet
CARRIERTYPE Code[20] Input Carrier Type
QTYPERLAYER Decimal Input Quantity per Layer
GROSSWEIGHT Decimal Input Gross Weight
NETTWEIGHT Decimal Input Net Weight
TAREWEIGHT Decimal Input Tare Weight
EAN Code[20] Input EAN Code

91-insert-uom-for-customer-item

Creates a new UOM for a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
LENGTH Decimal Input Length
WIDTH Decimal Input Width
HEIGHT Decimal Input Height
GROSSWEIGHT Decimal Input Gross Weight
NETTWEIGHT Decimal Input Net Weight
TAREWEIGHT Decimal Input Tare Weight
EAN Code[20] Input EAN Code
QTYPERUOM Decimal Input Quantity per UOM

Document Processing

6-check-mandatory-values

Validates that required fields for an item are filled.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
EXTBATCH Text Input External Batch No.
EXTCARRIER Text Input External Carrier No.
EXPIRYDATE Date Input Expiry Date
PRODDATE Date Input Production Date
FREEZINGDATE Date Input Freezing Date
RETURNRESULT Text Input Return result without error
RETURN VALUE Text Output TRUE if mandatory
VETCODE Code[20] Input Veterinary Code
WEIGHT Decimal Input Weight

15-get-mandatory-fields

Gets mandatory field flags for a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
EXTBATCH Text Output TRUE if Ext. Batch mandatory
EXTCARRIER Text Output TRUE if Ext. Carrier mandatory
EXPIRYDATE Text Output TRUE if Expiry Date mandatory
PRODDATE Text Output TRUE if Production Date mandatory
FREEZINGDATE Text Output TRUE if Freezing Date mandatory
WEIGHT Text Output TRUE if Weight mandatory
VETERINARY Text Output TRUE if Veterinary mandatory
SKAL Text Output TRUE if Skal mandatory
UNITCOST Text Output TRUE if Unit Cost mandatory

16-get-no-of-mandatory-fields-serial-no

Gets the number of required fields for serial number handling.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
DOCTYPE Integer Input Document Type
NOOFMANDFIELDS Integer Output Number of mandatory fields

25-check-product-var-active-and-return-items-in-doc

Checks if a product variant is active and returns items in a document.

Parameters
Parameter Type Direction Description
EANCODE Code[20] Input EAN Code
CUSTNO Code[20] Input Customer No.
DOCUMENTNO Code[20] Input Document No.
SKIPCUSTNOCHECK Text Input Skip customer check (any value)
ACTIVE Text Output "YES" or "NO"
ITEMFILTER Text Output Item filter string
FIRSTDOCLINENO Integer Output First document line no.
NUMBERLINENO Integer Output Number of lines

28-check-pickloc-ean-for-orderpicking-validation

Validates picking location or EAN for order picking.

Parameters
Parameter Type Direction Description
INPUT Text Input Input value (location or EAN)
PICKLOC Text Input Correct pick location
CUSTITEM Text Input Correct customer item
MESSAGE Text Input Error message text
RETURNPICKLOC Text Output Returns pick location if correct

Carrier Management

26-calculate-layer-height

Calculates layer heights for carriers.

Parameters
Parameter Type Direction Description
Maxheight Decimal Input Maximum height
Fromlayerheight Decimal Input Layer height from carrier
Fromqtyoncarrier Decimal Input Quantity on from carrier
Fromqtyperlayer Decimal Input Quantity per layer from carrier
Fromcarriertype Code[20] Input Carrier type from
Fromqtyperpal Decimal Input Standard qty per pallet from
Tolayerheight Decimal Input Layer height to carrier
Toqtyoncarrier Decimal Input Quantity on to carrier
Toqtyperlayer Decimal Input Quantity per layer to carrier
Tocarriertype Code[20] Input Carrier type to
Toqtyperpal Decimal Input Standard qty per pallet to
Layersremaining Decimal Output Layers remaining
Qtyremaining Decimal Output Quantity remaining
Qtytotransfer Decimal Output Quantity to transfer
Layersallowed Decimal Output Layers allowed
Qtyallowed Decimal Output Quantity allowed
Layerstotransfrom Decimal Output Layers to transfer from
Layerstotransto Decimal Output Layers to transfer to

71-default-packing-carrier

Gets carrier packing information.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UNITOFMEASURE Code[10] Input Packing unit of measure
CARRIERTYPE Code[20] Input Carrier type code
SHOWCARRIERTYPE Text Input Show carrier type in result (any value)
ERRORIFNOTFOUND Text Input Error text if not found
RESULT Text Output Result text
QTY PER UOM Decimal Output Quantity per UOM
QTY PER CARRIERUOM Decimal Output Quantity per carrier UOM

72-default-packing-quantity

Gets formatted packing quantities.

Parameters
Parameter Type Direction Description
DOCTYPE Integer Input Document Type
DOCNO Code[20] Input Document No.
DOCLINENO Integer Input Document Line No.
PACKAGEUOM Code[10] Input Package UOM Code
SEPARATOR Text Input Separator text
RESULT Text Output Formatted result

Condition and Status Management

2-check-if-item-remark-exists

Checks if remarks exist for a customer item.

Parameters
Parameter Type Direction Description
CUSTITEMNO Code[20] Input Customer Item No.
CHECKCODE Code[20] Input Check Code
RESULT Text Output "Yes" or "No"

82-set-item-status

Sets the status for a customer item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
NEWSTATUS Code[20] Input New Status Code
ONLYIFSTATUS Code[20] Input Only change if current status matches
REASONCODE Code[20] Input Reason Code
REASONDESC Text Input Reason Description
ONLYIFNEWSTATUS Code[20] Input Only if new status matches
ONLYDIFFERENT Text Input Only set if different from current

84-get-statuscode-from-item

Retrieves the status code of an item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
ITEMSTATUSCODE Code[20] Output Item Status Code

85-check-is-quarantaine-duration-is-active

Checks if quarantine period is active for an item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
RETURN Text Output "TRUE" if active, "FALSE" if not

86-get-condition-value-for-customer-item

Gets a condition value for a customer item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
CONDITIONCODE Code[20] Input Condition Code
VALUE01 Text Output Condition Value

96-set-condition-value-for-customer-item

Sets a condition value for a customer item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
CONDITIONCODE Code[20] Input Condition Code
VALUE01 Text Input New Condition Value

Miscellaneous Functions

41-copy-customer-item

Creates a copy of a customer item.

Parameters
Parameter Type Direction Description
SOURCEITEMNO Code[20] Input Customer Item No. to copy
NEWITEMNO Code[20] Input/Output New Customer Item No.
COPYADDRESSSETUP Text Input Copy Address Setup (any value)
COPYCARTYPEUOM Text Input Copy Carrier Type UOM (any value)
COPYCOMMENTS Text Input Copy Comments (any value)
COPYCONDITIONS Text Input Copy Conditions (any value)
COPYCUSTITEMCUSTOMATTRIBUTES Text Input Copy Custom Attributes (any value)
COPYCUSTITEMTAXDATA Text Input Copy Tax Data (any value)
COPYCUSTITEMWHSESTRATEGY Text Input Copy Warehouse Strategy (any value)
COPYDIMENSIONS Text Input Copy Dimensions (any value)
COPYEANUNITOFMEASURE Text Input Copy EAN UOM (any value)
COPYFEATURES Text Input Copy Features (any value)
COPYITEMTRANSFORMATION Text Input Copy Item Transformation (any value)
COPYLOCATIONCONTENT Text Input Copy Location Content (any value)
COPYPACKAGEUOM Text Input Copy Package UOM (any value)
COPYTARIFFNO Text Input Copy Tariff No. (any value)
COPYTRANSLATIONS Text Input Copy Translations (any value)
COPYUNITPRICE Text Input Copy Unit Price (any value)
NEWITEMNO Code[20] Output New Customer Item No.

61-get-item-package-based-on-itemno-code

Gets the package code for an item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
EMBTYPE Integer Input Package Type (1=Receipt, 2=Shipment)
EMBCODE Code[20] Output Package Code
FILTERDEF Text Input Filter on Default (any value)

62-get-item-package-info

Gets package information for an item.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
UOM Code[10] Input Unit of Measure Code
EMBCODE Code[20] Input Package Code
EMBDIV Decimal Output Package Divisor
EMBMULTI Decimal Output Package Multiplier

87-print-zpl-label-from-unit-of-measure

Prints a ZPL label for a unit of measure.

Parameters
Parameter Type Direction Description
ITEMNO Code[20] Input Customer Item No.
EANCODE Code[20] Input EAN Code
UOM Code[10] Input Unit of Measure
LAYOUTCODE Code[10] Input ZPL Layout Code
LABELCOUNT Integer Input Number of Labels
PRINTERCODE Code[20] Input Printer Code

Note: This reference guide covers all functions in the 3PL Scan Function Item codeunit. For implementation details or assistance with specific scenarios, please contact your system administrator or 3PL support team.

Edit this page